Ford XA Falcon RPO83 Coupe Wild Plum 1/18 Classic Carlectables
Classic Carlectables Ford XA Falcon RPO83 Coupe Wild Plum 1/18 Scale Diecast.
Early in 1972 Ford released the XA GT Falcon in sedan and hardtop versions. It was the first Falcon to be totally designed by Australians, as production of the Falcon in the US had ceased some 18 months earlier. The XA was the biggest Falcon yet, with the boldest styling, designed for wider appeal with its less aggressive look and creature comforts.
Ford built 891 hardtops between July 1972 and September 1973, including the construction of 129 RPO83 coupes. The GT Specials - that's their official title - were Regular Production Option 83 on Ford's options list for Falcon GTs.
The biggest change on the RPO83 to the normal GT was the fitting of a huge 780cfm (cubic feet per minute) four barrel Holley carburettor and (hidden away under the V-banks) fabricated exhaust extractors. These added 30-40bhp to the existing 300bhp for much improved performance. Other changes included a modified sump with additional baffles and a manual choke. They used most of the bolt-on engine components intended for the Phase IV GT-HO - the 'Supercar' killed by political and public pressure before it went into production in 1972. The new model could run the quarter in the high 14s and had a top speed of around 140mph (225kph).
Features
The comprehensive front end features engraved headlights and indicators, as well as the finely moulded front grille with GT badge.
Bathurst Globe alloy rims are an outstanding feature on this model together with the red wall tyres.
Classic 'Ironing Board' GT rear wing is faithfully reproduced adding to the aggressive styling of the XA.
Boot includes finely moulded soft rubber mat that is removable, along with the jackbag and spare wheel with retaining cover.
Interior includes XA sports steering wheel, full dash instrumentation and components, with drivers and passenger side rubber floor mats.
The engine and surrounding bay have an outstanding level of detail including accurate graphics.
The chassis detail continues with accurate representation of the sump, gearbox, engine underside and exhaust.
Underside detail, including fuel tank and drivetrain, is a distinguishing feature of Classic Carlectables' models.
Item includes certificate with individual production number.
Note: Checkout will occur on the merchants website, and will open in a new browser tab.
Scale Hobbies Ltd
021974620
Coast Plaza, 719 Whangaparaoa Rd, Whangaparaoa, North Auckland
This business has been trading for 4.0+ years on Website Worlds eCommerce platform!
Categories: 1/18 Scale Diecast Cars (587)
Other products you might be interested in
-
$145.00
-
Scale Hobbies Ltd North Auckland$255.00
-
Featured$225.00
-
Scale Hobbies Ltd North Auckland$355.00
-
Scale Hobbies Ltd North Auckland$359.00
-
Scale Hobbies Ltd North Auckland$449.00
-
$399.00
-
Scale Hobbies Ltd North Auckland$275.00
-
56%off$225.00$99.00
-
Scale Hobbies Ltd North Auckland$195.00
-
$355.00
-
$179.00
-
$34.00
-
$145.00
-
Scale Hobbies Ltd North Auckland$129.00
-
Scale Hobbies Ltd North Auckland$315.00
-
$145.00
-
Scale Hobbies Ltd North Auckland$315.00
-
Scale Hobbies Ltd North Auckland$355.00
-
$355.00
-
$255.00
-
Scale Hobbies Ltd North Auckland$565.00
-
Scale Hobbies Ltd North Auckland$355.00
-
$155.00
-
Scale Hobbies Ltd North Auckland$195.00
-
Scale Hobbies Ltd North Auckland$149.00
-
$145.00
-
Featured$145.00
-
$175.00
-
Scale Hobbies Ltd North Auckland$145.00
-
Scale Hobbies Ltd North Auckland$325.00
-
Scale Hobbies Ltd North Auckland$315.00
-
$145.00
-
$295.00
-
$129.00
-
Scale Hobbies Ltd North Auckland$225.00
-
$155.00
-
Scale Hobbies Ltd North Auckland$315.00
-
Scale Hobbies Ltd North Auckland$359.00
-
$449.00
-
$145.00
-
Scale Hobbies Ltd North Auckland$199.00
-
$315.00
-
$375.00
-
Scale Hobbies Ltd North Auckland$449.00
-
$325.00
-
$145.00
14/386 Richmond Road, Grey Lynn, Auckland 1021